Panasonic KX-T 1232 Programming Codes Move switch on left side of cabinet to PROGRAM. Use main phone to program. (Return to middle position when done) |
||
Code |
Description (Default) |
|
00 |
Time/Date |
|
01 |
System Speed Dial (00 to 99) |
|
02 |
Extension Number Assignment (01=101 etc.) |
|
03 |
Operator Assignment (Operator 1 and Operator 2) |
|
04 |
Paired Telephone DSS Console Assignment |
|
05 |
Automatic CO Transfer using DSS key (With/Without Transfer) |
|
06 |
Day/Night Service (Manual/Automatic) |
|
07 |
System Starting Time for Day/Night service (9:00 AM to 5:00 PM) |
|
08 |
Call Hunting Setting (Group 1 through Group 8) |
|
09 |
Hunting Type (Terminate/Circular) |
|
12 |
Toll Restriction-System Speed Dialing (Class 1, 2, 3, 4, 5) |
|
13 |
Toll Restriction-Class 2 Denied Code Assignment |
|
14 |
Toll Restriction-Class 3 Denied Code Assignment |
|
15 |
Toll Restriction-Class 4 Denied Code Assignment |
|
16 |
Toll Restriction-Class 5 Denied Code Assignment |
|
17 |
Toll Restriction-Denied Code Assignment |
|
18 |
Hold Recall Time set (.5 Min./1 Min./1.5 min./2 Min./Disable) |
|
19 |
Transfer Recall Time (30 Seconds/2 Minutes( |
|
20 |
Call Forwarding Start time (1,2,3,4 rings delay) |
|
21 |
Pickup Dial Delay Time (1, 2, 3, 4 Seconds) |
|
22 |
CO to CO Duration Time Limit 1 to 32 Minutes |
|
23 |
SMDR RS232 Parameters |
CR+LF, CR Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600 Word Length 7 Bits, 8 Bits Parity None, Mark, Space, Even, Odd Stop Bit Length 1 Bit, 2 Bits |
24 |
SMDR Parameters (Lines per page 66) (Skipping lines 0) |
|
25 |
Incoming/Outgoing Selection for printing |
|
26 |
Secret Speed Dialing/One Touch Dial printing (Printing/No Printing) |
|
27 |
SMDR System Data Dump |
|
28 |
Duration Time Count Start Mode (5, 10, 15 Seconds after dial) |
|
29 |
External Paging Access Tone (Enable/Disable) |
|
31 |
DISA (Enable/Disable) |
|
32 |
OPX (Enable/Disable) |
|
33 |
OHCA (Enable/Disable) |
|
34 |
System Working Report |
|
40 |
CO Connection (Connect/Not Connect Lines 1 through 12) |
|
41 |
DTMF/Pulse/Call Blocking |
|
42 |
Pulse Speed Selection |
|
43 |
Host PBX Access Codes Assignment |
|
44 |
Trunk Group Assignment 1-8 |
|
45 |
Outward Dialing, Day (All stations enabled) |
|
46 |
Outward Dialing, Night (All stations enabled) |
|
47 |
Ringing, Day (All stations enabled) |
|
48 |
Ringing, Night (All stations enabled) |
|
49 |
Ring Delay, Day (1, 2, 3, 4, Immediate Rings) |
|
50 |
Ring Delay, Night (1, 2, 3, 4, Immediate Rings) |
|
51 |
CO Mode, Day (Normal, DIL, DISA) |
|
52 |
CO Mode, Night (Normal, DIL, DISA) |
|
53 |
Pause Time Assignment (1.5, 2.5, 3.5, 4.5 Seconds) |
|
54 |
Hook Flash time (300ms 600ms 900ms 1200ms)(600ms default) |
|
55 |
CPC |
|
56 |
Disconnect Time (1.5, 4.0 Seconds) |
|
57 |
Auto Designated line access (Enable/Disable) |
|
60 |
Extension Groups 1 through 8 (Group1) |
|
61 |
Service Class Assignment of Toll Restriction, Day |
|
62 |
Service Class Assignment of Toll Restriction, Night |
|
63 |
Extension Name |
|
64 |
Account Code Input Mode |
|
65 |
Call Transfer to Outside line (Enable/Disable) |
|
66 |
Call Forwarding to Outside Line (Enable/Disable) |
|
67 |
Executive override (Enable/Disable) |
|
68 |
DND Override (Enable/Disable) |
|
69 |
SLT Connection with proprietary telephone (Enable/Disable) |
|
70 |
Ringing from Door Phone, Day (Enable/Disable) |
|
71 |
Ringing from Door Phone, Night (Enable/Disable) |
|
72 |
Assignment of Door Opener, Day (Enable/Disable) |
|
73 |
Assignment of Door Opener, Night (Enable/Disable) |
|
80 |
Voice Mail Port assignment (Enable/Disable) (Circle3, Circle B only) | |
81 |
DTMF Integration Assignment (Enable/Disable) (Circle3, Circle B only) | |
91 |
Call on Hold for SLT (Hold 1=Flash or Hold 2=Flash 20) |
|
99 |
System Data Clear |
Voice Mail Integration (Forwarding) (B is recommended for TVS) (Circle3, Circle B only) | ||
Setting A | 7191# | Forwards a mailbox number to the VPS port |
Setting B | 7192# | #6 plus a mailbox number is sent to the VPS |
Cancel | 7190# | Cancels all forwarding |